Duwel Pink Wood Primer

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Matt
Coverage 8.8 - 9.2 sqm/L
Drying Time 4 hours
Coats 1

Product Features

Superior Adhesion
Superior Wood Penetration
Better Top Coat Coverage

Product Description

These are solvent-based protective primer for interior wood surfaces that covers the wood grains and provide uniform surface for subsequent paints. It enhances coverage of finish paint besides improving enamel hold out properties.

Application Description

Step 1 : Surface Preparation

Ensure surface is free from grime, dust and grease. Remove loose or flaking particles. Sand the surface by using Emery Paper [No.180] and wipe clean.

Step 2 : Application process

Once the wooden surface is dry and smooth. prime with a coat of ICI Wood primer. Available in “Ready For Use" form for brushing. Add up to 10% by Volume of lCl Dulux Thinner (61-33) to primer for conventional spray application. Allow it to dry for 4to 6 hours after application. Fill up minor cracks and defects with KP filler or an equivalent good quality solvent-based putty after applying first coat of primer. Allow putty to cut dry. Then apply second coat of primer on the puttied surface and allow to dry for 4 to 6 hours. Before application of topcoat, do light sanding with Emery paper{No.320) and wipe clean.

Step 3 : Drying time
ICI wood primer is normally surface dry in 30 min & recoatable after 4 hrs. under standard drying conditions (25 deg C & 50% Relative Humidity with good ventilation). Drying time will vary depending on the Climatic conditions.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
2. Cleaning

Clean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator