Dulux Red-oxide Metal Primer

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 8.8 - 9.2 sqm/L
  • Drying Time 2.5 hours
  • Coats 1
Product Features
  • Stronger Adhesion
  • Effective Corrosion Protection

This is a solvent based economical primer anti-corrosive protective primer for interior and exterior ferrous and non-ferrous metal work, including steel work, new, weathered and pre-treated zinc and galvanized iron. It may also be applied over pre-treated aluminium.
Step 1 : Surface Preparation

Surface must be clean, dry and free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials rubbing down using a suitable abrasive paper.

Step 2 : Application process

For best result, up to 1-part Dulux Thinner (61-33) or equivalent to 10 parts of paint by volume for brush application.

Step 3 : Drying time
For single coat at standard thickness under normal condition, touch dry is within 30 mins and tack free dry is within 2.5 hours.
Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. After use
    Clean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.
Fetching the data, please wait...