- Water-based Primer for Wood & Metal
- Superior Corrosion Resistance
- Quick drying
Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information
Thanks for registering
We will send you colourful news every now and then
Dulux Zinc Yellow Metal Primer
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 8.3 - 10.2 sqm/L
-
Drying Time 6 hours
-
Coats 2
-
Zinc-Phosphate Based
-
Stronger Adhesion
-
Superior Corrosion Resistance
Product Description
Dulux Zinc Yellow Metal Primer is a solvent based protective primer suitable for interior and exterior ferrous and surface treated non-ferrous metal work. It gives effective protection against Corrosion to the surface and has strong adhesion properties. Appropriate application of the primer ensures better protection to the metal surface as well as higher durability of finish coat.
Application Description
Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by sanding the surface by using Emery paper No.180 & wipe clean.
Step 2 : Application process
Brush & Roller : For best result thinning is not recommended.
Spray : Add up to 10% Dulux Thinner/White Spirit/Mineral Turpentine Oil in 1 litre of the product.
Step 3 : Drying time
For single coat at standard thickness under normal condition, touch dry is within 60 mins and tack free dry is 4-6 hours.
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by sanding the surface by using Emery paper No.180 & wipe clean.
Step 2 : Application process
Brush & Roller : For best result thinning is not recommended.
Spray : Add up to 10% Dulux Thinner/White Spirit/Mineral Turpentine Oil in 1 litre of the product.
Step 3 : Drying time
For single coat at standard thickness under normal condition, touch dry is within 60 mins and tack free dry is 4-6 hours.
Health & Safety
Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
Tips & Advice
-
1. Preparing the SurfacesEnsure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
-
2. CleaningClean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator