- Water Beading Effect
- Microbond Latex Film
- Fungal Guard
Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
Thanks for registering
We will send you colourful news every now and then
Delete Account
Dulux Weathershield Protect
-
Finish Mid Sheen
-
Coverage 4.6-5.6 sqm/L
-
Drying Time 4-6 Hours
-
Coats 2
-
2X Complete Protection
-
Dirt and Dust Resistance
-
Anti Color Fading
-
Algal and Fungal Resistance
Product Description
Application Description
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self prime with Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Normal Application :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Step 3 : Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesEnsure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
-
2. CleaningClean all epquipment with clean water immediately after use.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.