For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Matt
Coverage
18.5 - 23.2 sqm/L
Drying Time
4 hours
Coats
1
Product Features
Superior Adhesion
Superior Whiteness
Anti-Chalking
Product Description
Dulux Promise Interior Primer is a good quality primer having good adhesion to interior masonry surfaces, both new and previously decorated such as brickwork, plaster, cement, fibre boards, etc. It is specially formulated to give good filling property. Correct application of primer assures better quality and durability of the finished coat.
Application Description
Step 1 : Surface Preparation
All surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter, wiped off. Suitable remedial measures should be taken, in case of water seepage/leakage problems. Fungus affected areas need separate treatment.
Step 2 : Application process
Apply a coat of primer. If required, use ICI Ready Mix Wall Filler or any other oil-based putty to fill cracks and dents and make the surface uniform and free from undution. After sanding the puttied surface, apply another coat of primer. Allow primer coat to dry overnight before application of finish paint.
Step 3 : Drying time Prime surface with a coat of Dulux Water Based Cement Primer or Duwel Acrylic Primer and allow it to dry overnight. Use Dulux Acrylic Wall Putty to rectify cracks / dents and smoothen out the surface. Allow drying for 4-6 hours. Apply a second coat of Dulux Acrylic Wall Putty and allow it to dry for 4-6 hours. Sand the surface with Emery Paper 180 to smoothen the putty surface. Wipe off loose particles. Apply another coat of primer on the puttied surface. Allow drying for 4-6 hours. Sand the surface with Emery Paper 380 and wipe clean. Primer-Putty-Primer is a must to get the desired effect of topcoat.
Health & Safety
Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
2.
Cleaning
Clean all equipment with water immediately after use.
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
