- Water Beading Effect
- Microbond Latex Film
- Fungal Guard
Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information
Thanks for registering
We will send you colourful news every now and then
Delete Account
Dulux Weathershield Flash
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Mid Sheen
-
Coverage 4.6-5.6 sqm/L
-
Drying Time 4-6 Hours
-
Coats 2
-
Paint and Primer in one
-
High Bond Latex Technology
-
Algal and Fungal Resistance
Product Description
Dulux Weathershield Flash is a high quality primer cum top coat combination developed using the unique High Bond Latex technology which is 100 % acrylic based smooth emulsion with superior all weather protection with excellent anti-algal and anti-fungal properties. This special product delivers the same finish as conventional system (1 coat primer followed by 2-3 coats of top coat finish) without the need of a primer.
Application Description
Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply 1 self- priming coat of Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat.
Dilute 1 liter of the paint with 400-500 ml of clean water for application. In case of dark colours, dilute with maximum of 250 ml of water to 1liter paint. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours
Normal Application :
Dilute 1 liter of the paint with 400-500 ml of clean water for application. In case of dark colours, dilute with maximum of 250 ml of water to 1liter paint. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours
Step 3 : Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply 1 self- priming coat of Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat.
Dilute 1 liter of the paint with 400-500 ml of clean water for application. In case of dark colours, dilute with maximum of 250 ml of water to 1liter paint. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours
Normal Application :
Dilute 1 liter of the paint with 400-500 ml of clean water for application. In case of dark colours, dilute with maximum of 250 ml of water to 1liter paint. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours
Step 3 : Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating
Health & Safety
No added Lead, Mercury & chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Refer Safety Data Sheet for more details.
Tips & Advice
-
1. Preparing the SurfacesEnsure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
-
2. CleaningClean all epquipment with clean water immediately after use.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator