For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Matt
Coverage
11.2 - 13.0 sqm/L
Drying Time
4-6 Hours
Coats
2
Product Features
COLOURS OF THE WORLD
Pro Coat Technology
Anti-Bacterial
Colourguard Technology - Long Lasting Colours
Product Description
Dulux SuperCover is a smooth premium interior emulsion for walls & ceilings that enables you to bring home the Colours of the World from your favourite destinations. Its ColourGuard technology ensures that these colours are protected from daily wear & tear and last longer. Its ProCoat Technology gives unmatched opacity & good coverage. And now with added benefit of Anti-Bacterial, Dulux SuperCover helps to inhibit growth of certain bacteria on the painted surface.
Application Description
Step 1: Surface Preparation Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Interior Acrylic Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Dulux Acrylic Wall Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat.
Step 2: Application Process Use 40-60% of clean water for Br. White and Pastel shades. For Dark shades use 25-40% of clean water. Do not over dilute and shake the paint well before use. Stir thoroughly before use. Sand the surface with emery paper no 180 and then wipe clean. Apply 2-3 coats of Dulux SuperCover with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades.
Step 3: Drying Time Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying.
Health & Safety
No added Lead, Mercury & chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Refer Safety Data Sheet for more details.
Ensure that the surface is clean, dry and free from all loose particles, paint film, dust, dirt, mould, fungal growth etc. before application; Surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off; For New concrete / plaster, surface should be allowed to mature properly; Use suitable Dulux AquaTech range of products to fix the dampness issue in wall; Proper surface preparation is must to get the desired effect and finish.
2.
Cleaning
Clean surface from all loose poorly adhering materials by rubbing down using a suitable abrasive paper
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
