- Highly Washable Paint
- Anti-Viral
- Anti-Bacterial
Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information
Thanks for registering
We will send you colourful news every now and then
Dulux SuperCover Ultra
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Matt
-
Coverage 120-140 sqft/litre/2 coats
-
Drying Time 4-6 hours
-
Coats 2
-
Silicone technology
-
Colourguard Technology - Long Lasting Colours
-
Anti-Bacterial
-
Fungal Guard
-
Smooth Matt Finish
-
High coverage
-
High opacity
Product Description
Dulux SuperCover Ultra is a smooth premium interior emulsion for walls and ceilling that enables you to bring home the long-lasting colors. Its Silicon technology and Color guard technology ensure that these colors are protected from daily wear and tear and last longer while providing high whiteness and hiding.
Application Description
Before application, read the safety, health and environmental information and the precautions given below.
Application Tool:
Suitable for application by brush and roller.
Application Tool:
Suitable for application by brush and roller.
Health & Safety
Keep out of the reach of children, away from food, drinks and animal feed.
Avoid contact with skin or eyes. Wear eye/hand protection.
Do not breathe vapour/spray. Use only in well ventilated areas.
Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
Remove as much paints as possible from brushes and rollers before cleaning.
Tips & Advice
-
1. Preparing the Surfaces• Ensure that the surface is clean, dry, free from all loose particles, paint film, dust, dirt, mould, fungal growth etc. before application.
• Surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.
• For New concrete / plaster, surface should allow to mature properly.
• For area severely affected by Fungus application of Dulux Aquatech Pre-treatment coat is recommended.
• Fill up all minor cracks and defects with Dulux Aquatech range of Crack fillers as per requirement / cement and sand mixture in the ration 1:3.
• In case of areas having dampness use Dulux Aquatech Interior Waterproof Basecoat on the bare surface as per recommendation.
• Proper surface preparation is must to get the desired effect and finish.
• Dulux SuperCover Ultra should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness. -
2. StoringObserve the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator