Dulux SuperClean 3in1

Tough on Stains Now Tough on Virus

Woodwind

Change Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Mid Sheen
Coverage 11 - 13 sqm/L
Drying Time 4-6 Hours
Coats 2

Product Features

Superior Washability
Anti-Viral
Tough Stain Repellant
Anti-Bacterial
Fungus Guard

Product Description

Dulux SuperClean 3in1 is an interior water based emulsion with KidProof+ Technology that delays stains from penetrating further into the paint ﬁlm and keeping it clean. With its anti bacterial property it also aids to inhibit growth of certain bacteria on walls. Now with new Silver Ion Technology, it comes with an added beneﬁt of anti-viral property that helps to eﬀectively work against certain virus. Dulux SuperClean 3in1 provides protection for your walls not only from stains but also certain bacteria and virus.

Application Description

Brush followed by Roller. Sand the surface with Emery paper No 160 and wipe off loose particles. Apply the first coat of Dulux Water Based Cement Primer or Dulux Solvent Based Cement Primer and allow it dry for 6 hours. Smoothen the surface by applying thin coats of Duwel Acrylic Wall based putty to fill in all the dents, allow the putty to dry overnight. Sand the surface with emery paper no 180 and wipe clean. Apply the 2nd coat of primer and allow drying for 6-8 hrs. Sand the surface with emery paper no 380 and wipe clean.

Health & Safety

• No added Lead, Mercury & chromium compounds. • Lead content in dried paint ﬁlm does not exceed 90 parts per million. • Treatments such as sanding, burning oﬀ etc. of paint ﬁlms may generate hazardous dust and other fumes. Wet sanding/ﬂaming should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. • Wear eye/hand protection. • Do not breathe vapour /spray. • Remove as much paint as possible from brushes and rollers before cleaning. • Avoid release to the environment. • Collect spillage. • Keep away from food drinks and animal feed. • Store in a cool and shaded place. • Container must be in a secure, upright position and be tightly closed. • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. • Do not empty into drains or water course. • Safety data sheet available for professional/user on request. • Do not use empty container for storing food. • Use only in well ventilated areas.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

New concrete/plaster surface should be allowed to mature properly. Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax etc. before application. All surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off. Suitable remedial measures should be taken in case of water seepage/leakage problems. Fungus affected areas need separate treatment.
2. Cleaning

Clean surface from all loose poorly adhering materials by rubbing down using a suitable abrasive paper

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator