- Water based Satin
- Anti-Yellowing
- Superior Clean Colors
Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information
Thanks for registering
We will send you colourful news every now and then
Delete Account
Dulux Super PU Satin
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Mid Sheen
-
Coverage 10.21-11.14 sqm/L
-
Drying Time 4 Hours
-
Coats 2
-
Super Tough Film
-
Super Rich & Clean colors
-
Fungal Resistance
-
Washable Paint
Product Description
Dulux Super Satin is a premium soft sheen enamel paint for interior and exterior wooden, metal and masonry surfaces. Dulux Super Satin gives a luxurious satin like smooth ¬finish and comes in a range of rich & clean colours. Its Duratough technology imparts toughness and durability to the paint ¬film. It also gives long lasting sheen and resists fungal attack, keeping the paint looking as good as new for a long time. For Warranty Registration Please Call Customer Care: 1800-3000-4455 in the SUPER PU SATIN. For more details on warranty please refer to the Warranty document.
Application Description
Step 1 : Surface Preparation
Ensure Surface is dry & free from grime, dust & grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe clean. For pre-painted surface, where putty application is not expected, use Emery paper No. 320 & wipe clean.
Step 2 : Application process
Brush or Roller: For best result, add up Single coat at standard thickness to 1 parts Duwel Thinner (61-33) or White Spirit/ Mineral Turpentine Oil (MTO) to 10 parts of paint by volume.
Step 3 : Drying time
Touch dry is up to 1 hour and tack free dry is within 2-4 hours.
Ensure Surface is dry & free from grime, dust & grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe clean. For pre-painted surface, where putty application is not expected, use Emery paper No. 320 & wipe clean.
Step 2 : Application process
Brush or Roller: For best result, add up Single coat at standard thickness to 1 parts Duwel Thinner (61-33) or White Spirit/ Mineral Turpentine Oil (MTO) to 10 parts of paint by volume.
Step 3 : Drying time
Touch dry is up to 1 hour and tack free dry is within 2-4 hours.
Health & Safety
Treatments such as sanding, burning off etc. of films may generate hazardous dust and/or fumes sanding/ flatting should be used wherever possible. Work in well ventilated areas. Refer Safety Data Sheet for more details.
Tips & Advice
-
1. Preparing the SurfacesEnsure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe
clean. For prepainted surface, where putty application is not expected use
Emery paper No. 320 & wipe clean. -
2. CleaningClean all equipment with Duwel Thinner (61-33) or White Spirit / Mineral Turpentine Oil immediately after use.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator