Dulux PU Satin Stay Bright

Salmon Sand

Change Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Mid Sheen
Coverage 9.2-11.1 sqm/L
Drying Time 4 hours
Coats 2

Product Features

Water based Satin
Anti-Yellowing
Superior Clean Colors
Low VOC

Product Description

Dulux Satin Stay Bright is a water based premium quality enamel. It gives a
finish that has the smoothness and stature of a soft sheen glow of satin.
Unlike ordinary enamel paints, Dulux Satin Stay Bright comes in rich and
bright colors with anti-yellowing properties. Dulux Satin Stay Bright is the
perfect top coat for wooden and metallic surfaces.

Application Description

Step 1 : Surface Preparation
Sand the surface with Emery paper 180, Wipe and clean. Flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible.
Step 2 : Application process
Dilute the paint as per recommended ratio. In case of wood and masonry surface, apply the first coat by brush, followed by leveling with a sponge roller. Allow to dry for at least 4-6 hrs. After complete drying of the first coat, apply the second coat and dry overnight. Follow the same dilution ratio for second coat.
Step 3 : Drying time
Touch dry for the paint is up to 40mins.

Health & Safety

Treatments such as sanding, burning off etc. of ﬁlms may generate hazardous dust and/or fumes sanding/ ﬂatting should be used wherever possible. Work in well ventilated areas. Refer Safety Data Sheet for more details.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Ensure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe
clean. For prepainted surface, where putty application is not expected use
Emery paper No. 320 & wipe clean.
2. Cleaning

Clean all equipment with water immediately after use.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator