Dulux Lustre

Slate Brown

Change Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Mid Sheen
Coverage 4.6-5.5 sqm/L
Drying Time 6 hours
Coats 2

Product Features

High opacity
Multisurface Paint
Washable
Best dana finish

Product Description

Dulux Lustre Dana Finish Enamel is special enamel paint with unique Grain Technology to provide a unique Dana Finish and Superior Tensile Strength to provide hard ¬films. It also offers pearl like fi¬nish, when touched up with rollers while it is wet. It is recommended for interior use & can be used on plastered walls & wooden surfaces

Application Description

Step 1 : Surface Preparation
Prime the surface with Duwel Wood Primer for wood or Dulux SB cement primer for masonry surface. Smoothen the surface by applying good quality putty and sand it after drying. Apply second coat of putty if required. Smoothen the surface by sanding with emery paper no. 320 & wipe clean. Apply second coat of Primer with brush and roller
Step 2 : Application process
Stir the paint well & strain through the muslin cloth before use. Apply the fi¬rst coats of Dulux Lustre Dana Finish Enamel without thinning for better performance. If required dilute the material with 10% of Duwel Thinner (61-33) or Mineral Turpentine Oil. Apply second coat without thinning after the complete drying of the ¬first coat (6 – 12 hrs).
Step 3 : Drying time
Touch dry is up to 1 hour and tack free dry is within 4-6 hours.

Health & Safety

Treatments such as sanding, burning off etc. of ﬁlms may generate hazardous dust and/or fumes sanding/ ﬂatting should be used wherever possible. Work in well ventilated areas. Refer Safety Data Sheet for more details.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Ensure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe
clean. For prepainted surface, where putty application is not expected use
Emery paper No. 320 & wipe clean.
2. Cleaning

Clean all equipment with Duwel Thinner (61-33) or White Spirit / Mineral Turpentine Oil immediately after use.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator