For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Mid Sheen
Coverage
4.6-5.5 sqm/L
Drying Time
6 hours
Coats
2
Product Features
High opacity
Multisurface Paint
Washable
Best dana finish
Product Description
Dulux Lustre Dana Finish Enamel is special enamel paint with unique Grain Technology to provide a unique Dana Finish and Superior Tensile Strength to provide hard ¬films. It also offers pearl like fi¬nish, when touched up with rollers while it is wet. It is recommended for interior use & can be used on plastered walls & wooden surfaces
Application Description
Step 1 : Surface Preparation Prime the surface with Duwel Wood Primer for wood or Dulux SB cement primer for masonry surface. Smoothen the surface by applying good quality putty and sand it after drying. Apply second coat of putty if required. Smoothen the surface by sanding with emery paper no. 320 & wipe clean. Apply second coat of Primer with brush and roller Step 2 : Application process Stir the paint well & strain through the muslin cloth before use. Apply the fi¬rst coats of Dulux Lustre Dana Finish Enamel without thinning for better performance. If required dilute the material with 10% of Duwel Thinner (61-33) or Mineral Turpentine Oil. Apply second coat without thinning after the complete drying of the ¬first coat (6 – 12 hrs). Step 3 : Drying time Touch dry is up to 1 hour and tack free dry is within 4-6 hours.
Health & Safety
Treatments such as sanding, burning off etc. of films may generate hazardous dust and/or fumes sanding/ flatting should be used wherever possible. Work in well ventilated areas. Refer Safety Data Sheet for more details.
Ensure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe clean. For prepainted surface, where putty application is not expected use Emery paper No. 320 & wipe clean.
2.
Cleaning
Clean all equipment with Duwel Thinner (61-33) or White Spirit / Mineral Turpentine Oil immediately after use.
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
