Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms and Conditions
Thanks for registering
We will sent you colourful news every now and then
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
Would you spare a minute to answer 3 questions
Thanks for registering
We will send you colourful news every now and then
Delete Account

Dulux FloorPlus
-
Finish Mid Sheen
-
Coverage 50-60 sqft/litre/2 coats
-
Drying Time Touch dry - Upto 30 mins
Recoat drying time - 6 hours
Curing - After 72 hours of application (low traffic) -
Coats 2
-
Anti Algal
-
High Adhesion
-
High Washability
-
Abrasion Resistance
Product Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesDIRECTIONS FOR USE
Application Tool: Suitable for application by brush or Roller.
Surface Preparation: Freshly Plastered/Concrete surfaces must be allowed to cure completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease or oily material, laitance, organic debris, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush or power tool cleaning followed by water jetting if required and appropriate surface cleaners. For repainting surfaces ensure all the old coating should be removed completely before application of Dulux FloorPlus.
Any cracks or crevices present should be filled with suitable filling compounds /cement sand mixture before application. Any dampness issue needs to be arrested appropriately before application. Dulux FloorPlus should not be applied to the surfaces which are exposed to continuous seepage or dampness.
After cleaning, sand the surface to remove any smoothness or glossy areas using wire brush or power tool sanding. Wash with Fresh water and allow the surface to dry.
Self-Priming coat Application:
Self-priming coat is must for Dulux FloorPlus. Apply a self-priming coat of Dulux FloorPlus to the prepared surface by diluting with 15-20% clean water and allow it to dry for min 5-6 hrs.
Finishing:
Stir thoroughly before use. Apply 2 coats of Dulux FloorPlus with Max of 5% dilution over the self-priming coat and allow a drying time of 5-6 hours between the coats. Don’t over dilute the paint more than the recommended dilution.
Drying Time: (Single coat at standard thickness):
• Touch Dry: Upto 30 Mins.
• Recoat: 5-6 hours.
• Curing: After 72 Hrs of application. (Low Traffic)
Drying time may vary according to temperature and humidity. For instance, drying time will be significantly longer in cool and damp conditions.
Cleaning: Clean all equipment with clean water immediately after use. Refer to Dulux Product Data Sheet for further details. -
2. StoringObserve the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Add to job

Dulux FloorPlus
Save job